Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Single Channel Digital Wireless Receiver with 572 to 616 MHz Frequency Range
Model: ULXD4=-J50A
- Predictive switching diversity
- High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters
- Intelligent scanning automatically finds and deploys the cleanest frequencies to transmitters over IR sync
- Interference detection and alerts provided on both the receiver and Wireless Workbench® 6
- Front panel gain adjustment buttons provide up to 60 dB additional gain
Product Info
Tech Specs
Related Products
Documents
The ULXD4 is an intelligent single-channel digital wireless receiver for use with ULX-D transmitters in demanding corporate, education, and performance environments. With an expansive set of professional features, including 24-bit / 48 kHz digital audio quality, efficient and intelligent RF performance, and AES 256-bit encryption, the ULXD4 provides a 64 MHz tuning range (region dependent), extensive antenna and spectrum options to provide uncompromising wireless tailored for professional sound reinforcement.
- Predictive switching diversity
- High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters
- Intelligent scanning automatically finds and deploys the cleanest frequencies to transmitters over IR sync
- Interference detection and alerts provided on both the receiver and Wireless Workbench® 6
- Front panel gain adjustment buttons provide up to 60 dB additional gain
- AES 256-bit encryption-enabled for applications where secure transmission is needed
- Ethernet networking provides streamlined setup across multiple receivers, Wireless Workbench® 6 integration, and AMX/Crestron control
- Support for frequency coordination with the Axient® Spectrum Manager
- Rugged metal chassis
- Intuitive front panel LCD menu and controls with lockout feature
- Upgraded LCD with adjustable contrast and brightness
- Audio and RF LED meters with peak indicator
- Remoteable 1/2 wave antennas
- Furnished rack hardware
- Dante Enabled - Yes
- Wireless: Yes
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): -0.40 F
- Transmission Range: 330 ft
- Certifications: CE
- Input Impedance (Audio): 50 ohm
- Output Impedance (Audio): 100 ohm
- Current Draw: 0.60 Amps
- DC Voltage: 15 Volts
- Depth: 18.40 in
- Height: 3.70 in
- Shipping Depth (with packaging): 18.75 in
- Shipping Height (with packaging): 8.50 in
- Shipping Width (with packaging): 15.50 in
- Width: 14.50 in
- Product Weight: 2.84 lbs
- Shipping Weight: 13 lbs
- Housing: Steel, Extruded Aluminum
- Audio Output::
- Gain Adjustment Range: -18 to +42 dB in 1 dB steps (plus Mute setting)
- Configuration: 1/4” (6.35 mm): Impedance balanced (Tip = audio, Ring = no audio, Sleeve = ground), XLR: Balanced (1=ground, 2=audio +, 3=audio -)
- Impedance: 1/4” (6.35 mm): 100 Ohm (50 Ohm Unbalanced), XLR: 100 Ohm
- Full Scale Output: 1/4” (6.35 mm): +12 dBV, XLR: LINE setting = +18 dBV, MIC setting = -12 dBV
- Mic/Line Switch: 30 dB pad
- Phantom Power Protection: 1/4” (6.35 mm): Yes, XLR: Yes
- NETWORKING::
- Power over Ethernet (POE): No, protected
- Network Interface: Single Port Ethernet 10/100 Mbps
- Network Addressing Capability: DHCP or Manual IP address
- Maximum Cable Length: 100 m (328 ft)
- RF INPUT::
- Spurious Rejection: >80 dB, typical
- connector type: BNC
- Impedance: 50 ohm
- Bias Voltage: 12 to 13 V DC, 170 mA maximum, per antenna
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Techmenity
close
Techmenity
119 W 23rd Street
Suite 600
New York, NY 10011
USA
(212) 235-7011
https://www.techmenity.com/
Contact in regards to this product:
Shure Incorporated
Model: ULXD4=-J50A
Request more information from a dealer near you
close
Request more information from a dealer near you